There are two basic Ford 4-Speed automatics: The light duty AOD/4R70 found mainly in half ton or lower applications, and the heavy duty E40D/4R100 in the heavy 1/2 plus all 3/4 and 1 ton trucks and motorhomes. These transmissions have a low first gear which is good for initial take off but this makes the transmission have very wide ratio changes. The intention by the designers was the best possible EPA mileage ratings, not performance.

Developed with upgraded internal components, Chevrolet Performance’s SuperMatic 6L80-E 6-speed automatic transmission offers an exceptional torque rating of 650 lb.-ft. – a 45 percent increase over regular production versions of the 6-speed automatic. 5-speed Automatic Gearbox 09A/09B Design and Function Self-Study Programme 232 Service. 2 NEW Important Note The new 5-speed automatic gearbox The new automatic gearbox is intended for installation in the Volkswagen and Audi platform for transversely mounted engines.

The GEAR VENDORS will give you Gear-Splitting to fix those wide ratios with a gear between each of them when you want it for tremendous gains in performance (see Final Drive Ratios). Whether you are accelerating with a Supercharged sport truck or climbing a hill with a heavy load in tow behind your diesel – gear-splitting = performance.

GearSplitting is the feature that allows the UNDER/OVERDRIVE™ to shift between the gears. When you want power you will now have approximately 1/2 the drop of engine rpm from one gear to the next. By keeping torque multiplication higher and engine rpm narrower you increase engine performance by typically more than 40hp and 60lb ft. of torque without any modification to the engine (see Horsepower and Torque curves) (see also, Common Questions on performance modifications).

This is why big trucks (Kenworths etc.) use gears (most 18 wheelers have 10 to 15 gears) instead of the other modifications, because gearing gives them performance which actually improves the reliability of the engine. The heavier you are loaded, the more you need a GEAR VENDORS.

Fuel Economy: Besides giving you 8 gears and lots of performance the Gear Vendors Under/Overdrive is the most effective way to improve fuel mileage on vehicles running a 3.73 or higher numerical rear gear (ie 4.10, 4.88). Expect 20% increases during highway cruising with any rear gear in the 4’s and 10-15% with a 3.73 with any big block engine gas or diesel. Small block V8 engines (4.6, 5.0, 5.4) do not have the bottom end torque to push the trucks aerodynamics in double overdrive so on the small blocks your factory gear should be good (with the exception of the supercharged small blocks).

Look at the Final Drive Ratios and notice that you will now have 3 different ratios of overdrive. Double overdrive for when running empty with your truck (no towed load), factory overdrive for in-town 60mph runs, and a .78 overdrive ratio for when towing that will give you more torque multiplication and cooler transmission temperatures (extending the life of your transmission) without any cost to fuel mileage.

If you have a rear end of 4.10 or greater and commonly drive the truck without a load, the Gear Vendors is going to pay for itself very quickly and bring a lot of enjoyment to driving the truck with lower engine noise better fuel mileage and of course the performance aspects of gear-splitting always available.

If you already have engine modifications (chips, exhaust, fuel increases, etc.) the GEAR VENDORS will let you get the most from them by working in narrower rpm ranges where the horsepower is. Also, by adding torque multiplication the GEAR VENDORS makes it easier for the engine and transmission to propel the vehicle.

On the 5 speed 5R110w you will notice virtually all the same benefits as the 4 speeds but two are most important – Double overdrive when running empty for fuel economy identical to the 4speeds comments above, and 3rd-over which when towing and climbing grades is invaluable a it is 28% faster than 3rd but 20% more torque multiplication than 4th (equivalent to putting a 4.89 rear instead of your 4.10).

The GEAR VENDORS comes with a 2 Year unlimited mileage warranty (1yr if you have a commercial truck – see Commercial section) and a 30 day money back guarantee so you know you will be happy with everything about how this unit installs and drives (see Warranty for details). The GEAR VENDORS is the only aftermarket performance device or auxiliary transmission to come as original factory equipment on new cars, trucks, vans and motorhomes.

With fuel prices what they are today, there is just no good reason not to own a Gear Vendors Under/Overdrive. Call us and we will answer any questions and gladly arrange for purchase and installation at your authorized local dealer of your preferred mechanic.

Find your transmission and rear gear multiplier below. The Final Drive Ratio shows you how many times the engine turns for one complete turn of the tires. This Final Drive number is also your torque multiplier when in that gear. GEAR VENDORS reputation for being the best is because of its sophisticated planetary construction. This means GEAR VENDORS is the only auxiliary intended as a GearSplitter behind automatics and the nicest to work behind both automatics and manuals. You are able to shift half gears that keep the engine in the power. Any auxiliary that requires you to lift off the accelerator or is not intended to shift frequently is not going to give you this performance.

There is not room here to cover all the details so call the factory to discuss the full benefits demonstrated on these charts.

Call or e-mail the factory to find out all the options available in your performance application, 1-800-999-9555.

General Motors is an innovator of automatic transmissions, introducing the Hydra-Matic in 1940.^[1] This list includes some GM transmissions.

Automatic transmissions[edit]

Early models[edit]

The GM Hydra-Matic was a success and installed in the majority of GM models by 1950. Through the 1950s, all makers were working on their own automatic transmission, with four more developed inside GM alone. All of GM's early automatic transmissions were replaced by variants of the Turbo-Hydramatic by the 1970s.

• 1940–1967 Hydra-Matic — Oldsmobile (now the trade name for all GM automatic transmissions)
• 1948–1963 Dynaflow — Buick
• 1950–1973 Powerglide — Chevrolet (also used by Pontiac, Holden, Vauxhall and Opel)
• 1968-1971 Torquedrive- Chevrolet ( Camaro and Chevy II, Nova. Manually shifted on Column. )
• 1957–1961 Turboglide — Chevrolet (V8 models only, except Corvette)
• 1958–1959 Flightpitch — Buick
• 1961–1963 Dual Path Turbine Drive — Buick
• 1961–1964 Roto Hydramatic — Oldsmobile/Pontiac (also used by Holden)
• 1964–1969 Super Turbine 300 — Buick/Oldsmobile/Pontiac (Oldsmobile Jetaway)
• 1968–1969 Torquedrive — Chevrolet (manually column shifted 2 speed automatic, 6 cyl only)
• 1956-1964 4 speed Controlled coupling HydraMatic, also known as Cadillac 315 or P 315 HydraMatic, Oldsmobile Jetaway, Pontiac Super HydraMatic.
• TempestTorque, ( Pontiac) a two speed based on Powerglide, but having the added feature of ' Split Torque ' dividing the engine power between mechanical connection and the torque converter in high gear.

Turbo-Hydramatic[edit]

The Turbo-Hydramatic was used by all GM divisions, and formed the basis for the company's modern Hydramatic line. The basic rear-wheel drive Turbo-Hydramatic spawned two front-wheel drive variants, the transverseTurbo-Hydramatic 125, and the longitudinalTurbo-Hydramatic 425. A third variant was the light-duty rear wheel drive Turbo-Hydramatic 180 used in many European models.

Heavy-duty rear wheel drive

• 1971–1994 3L80HD (heavy duty version of TH400)

Medium-duty rear wheel drive

• 1964–1992 Super Turbine 400/TH400/3L80
• 1969–1986 TH350/TH350C/TH375B/TH250/TH250C
• 1972–1976 TH375 — Light duty version of TH400
• 1976–1987 TH200/TH200C
• 1981–1990 TH200-4R
• 1982–1993 TH700R4/4L60

Light-duty rear wheel drive

• 1969–1998 TH180/TH180C/3L30 — 3-speed European/Asian model. Also manufactured and used by Holden as the Trimatic transmission.

Transverse front wheel drive

• 1980–1999 TH125/TH125C/3T40 — 3-speed light-duty
• 1984–1994 TH440-T4/4T60 — 4-speed medium-duty

Longitudinal front wheel drive

• 1966–1978 TH425 — 3-speed
• 1979–1981 TH325 — 3-speed
• 1982–1985 TH325-4L — 4-speed

5 Speed Automatic Transmission Price

Electronic Hydra-Matics[edit]

The next-generation transmissions, introduced in the early 1990s, were the electronic Hydra-Matics based on the Turbo-Hydramatic design. Most early electronic transmissions use the '-E' designator to differentiate them from their non-electronic cousins, but this has been dropped on transmissions with no mechanical version like the new GM 6L80 transmission.

Today, GM uses a simple naming scheme for their transmissions, with the 'Hydra-Matic' name used on most automatics across all divisions.

First-generation longitudinal (Rear Wheel drive)

• 1991–2001 4L30-E — 4-speed light-duty (used in BMW, Cadillac, Isuzu, and Opel cars)
• 1992– 4L60-E/4L65-E — 4-speed medium-duty (used in GM trucks and rear-wheel-drive cars)
• 1991– 4L80-E/4L85-E — 4-speed heavy-duty (used in GM trucks)

First-generation transverse (Front Wheel drive)

• 1995–2010 4T40-E/4T45-E — 4-speed light-duty (used in smaller front wheel drive GM vehicles)
• 1991–2010 4T60-E/4T65-E/4T65E-HD — 4-speed medium-duty (used in larger front wheel drive GM vehicles)
• 1993–2010 4T80-E — 4-speed heavy-duty (used in large front wheel drive GM vehicles, only with Cadillac NorthStar V8.

Second-generation longitudinal (Rear Wheel drive)

• 2000–2007 5L40-E/5L50 — 5-speed medium-duty (used in Cadillac's Sigma vehicles)
• 2007–present 6L45/6L50 — 6-speed medium-duty (used in GM Sigma platform cars)
• 2006–present: 6L80/6L90 — 6-speed heavy-duty (used in GM trucks and performance cars)
• 2014–present: 8L90 — 8-speed heavy-duty (used in GM trucks and performance cars)
• 2016–present: 8L45 — 8-speed light-duty (used in GM luxury cars)
• 2017–present: 10L80 - Ford-GM 10-speed automatic transmission (used in GM light trucks including pickups and related SUVs)
• 2017–present: 10L90 - Ford-GM 10-speed automatic transmission (used in GM performance cars)

*This transmission is part of a joint-venture between General Motors and Ford Motor Company to split development of two transmissions, a longitudinal 10-speed and transverse 9-speed. Ford led the design of the 10-speed transmission, as well as filing the design patents for said transmission. According to an official report by the SAE (Society of Automotive Engineers) the design of the 10-speed gearbox is essentially all Ford, while GM was responsible for designing the 9-speed 9T transverse automatic gearbox. As part of their joint-venture, Ford will let GM use the 10-speed transmission with rights to modify and manufacture it for their own applications. In-exchange for Ford's 10-speed transmission, General Motors will let Ford use its 9-speed transmission for front-wheel drive applications; Ford ultimately declined use of the 9T.^[2][3][4]

Second-generation transverse (Front Wheel drive)

• 2008–present: 6T30/6T40/6T45 — 6-speed light-duty
• 2006–present: 6T70/6T75 — 6-speed medium-duty
• 2016–present: 9T50/9T65 Hydra-Matic – 9-speed^[5]

Hybrid and PHEV[edit]

• 2ML70 - 2-Mode Hybrid transmission.
• 4ET50 (MKA) - Electric Drive Unit Transaxle (First Generation Chevrolet Volt / Cadillac ELR)
• 5ET50 (MKV) - Electronically controlled, continuously-variable automatic transaxle (Second Generation Chevrolet Volt)^[6]
• 5ET50 (MKE) - Electronically controlled, continuously-variable automatic transaxle Transaxle (Full Hybrid, Ninth Generation Chevrolet Malibu)^[7]
• 4EL70 (MRD) - Electric Drive Unit Transmission (PHEV Cadillac CT6)

Other automatics[edit]

• Aisin AF33 — 5-speed transverse automatic made by Aisin AW Co., Ltd.
• Allison 1000 Series — 6-speed longitudinal automatic made by Allison Transmission
• Saturn MP6/MP7 — 4-speed automatic developed by Saturn for use in the S-series from 1991 to 2002
• VTi transmission — continuously variable transmission
• Tremec M1L transmission — 8-speed Dual-Clutch made by Tremec for the Chevrolet Corvette C8
• GM CVT250 — continuously variable transmission

Future[edit]

Manual transmissions[edit]

Longitudinal transmissions[edit]

• Aisin AR5/MA5 — 5-speed longitudinal manual made by Aisin
• Aisin AY6 — 6-speed longitudinal manual made by Aisin
• Getrag 260 — 5-speed longitudinal manual made by Getrag
• Muncie M20 — 4-speed longitudinal wide ratio manual transmission made by GM at their Muncie, Indiana factory
• Muncie M21 — 4-speed longitudinal close ratio manual transmission made by GM at their Muncie, Indiana factory
• Muncie M22 — 4-speed longitudinal heavy duty close ratio manual transmission made by GM at their Muncie, Indiana factory
• Saginaw M26/27 transmission — 3 and 4-speed longitudinal light duty (less than 300 hp wide ratio manual transmission made by GM at their Saginaw, Michigan factory
• Muncie M62/M64 — 3-speed longitudinal transmission made by GM
• Muncie SM420 — 4-speed manual used up to 1967, very similar to sm 465 except small changes to gear ratios and location of reverse.
• New Process Gear NP435 - 4-speed longitudinal transmission used in a select handful of 67-72 GM pickups
• New Process Gear A833 RPO MY6 or MM7 — 4-speed longitudinal A833 overdrive transmission made by New Process Gear for early to mid 1980s General Motors Light Trucks
• Muncie SM465 — 4-speed longitudinal manual used in 68- 91 Chevy 1/2 3/4 and 1 ton trucks
• New Venture Gear NV1500 — 5-speed longitudinal manual made by New Venture Gear
• New Venture Gear 3500/4500 — 5-speed longitudinal manual made by New Venture Gear
• Borg-Warner T-10 transmission — 4-speed longitudinal manual currently made by Richmond Gear; originally made by Borg-Warner
• Tremec T-5 — 5-speed longitudinal manual currently made by Tremec; originally made by Borg-Warner
• Borg-Warner T-50 transmission — 5-speed longitudinal manual - used by GM in its H Body cars and a few other limited light duty applications from 1976 to 1978;
• Tremec T-56 — 6-speed longitudinal manual overdrive made by Tremec; formerly made by Borg-Warner
• Tremec TR-6060 — 6-speed longitudinal manual overdrive made by Tremec
• ZF S6-650 — 6-speed longitudinal manual made by ZF Friedrichshafen
• Tremec TR-6070 — 7-speed longitudinal manual overdrive made by Tremec

Transverse Transmissions[edit]

• F23 — 5-speed transverse manual manufactured by Getrag
• F35 — 5-speed transverse manual manufactured by Saab in Gothenburg, Sweden
• F40 — 6-speed transverse manual manufactured by FGP Germany
• Getrag 282 — 5-speed transverse manual designed by Getrag and manufactured by Muncie Getrag
• Getrag 284 — 5-speed transverse manual designed by Getrag and manufactured by Muncie Getrag
• MP2/MP3 — 5-speed manual developed by Saturn for use in the S-Series from 1991 to 2002

See also[edit]

5 Speed Automatic Transmission For Sale

References[edit]

5 Speed Automatic Vs Manual

1. ^'Hydra-Matic History: The First Automatic Transmission'. Ate Up With Motor. 2010-05-29. Retrieved 2014-01-15.
2. ^'Exclusive: An Inside Look At Ford's New 10 Speed Transmission'. http://www.thetruthaboutcars.com/. Retrieved 2015-03-16.External link in |publisher= (help)
3. ^Brooke, Lindsay. 'Ford and GM finally consummate 9- and 10-speed joint development'. articles.sae. SAE International. Retrieved 20 March 2016.
4. ^'Ford passes on GM's 9-speed automatic transmission'. Retrieved 2018-11-12.
5. ^Panait, Mircea. 'GM Hydra-Matic 9T50 Transmission Confirmed for Chevrolet Cruze, Malibu, Equinox'. autoevolution. Retrieved 2016-12-07.
6. ^'GM Service Insights, pg 23'(PDF). Archived from the original(PDF) on 2019-01-09. Retrieved 2019-07-16.
7. ^'GM Service Insights, pg 23'(PDF). Archived from the original(PDF) on 2019-01-09. Retrieved 2019-07-16.

5 Speed Automatic